Zirconia Metering Upper Nozzles

Product Description

The application of this products accomplishes the quick exchange of SEN,extends service life of tundish and decreases production cost.The bore of tundish nozzle is sintered zirconia and wholely inlayed,which has better anti-corrosion and anti-erosion properties,and extends working duration of tundish and has better cooperation with stoppers.Therefore it can meet different continuous casting levels.

(0) Reviews

Inquiry NowInquiry Now

Share To:

Basic Info
Core Highlights
FAQ
Inquire Now
Related Products
Customer Reviews

Basic Info

Items		Seat	Insert
Chemical Composition(%)	Al2O3	≥65	---
Chemical Composition(%)	ZrO2	---	≥85
Bulk Density(g/cm³ )		≥2.6	≥3.8
(%) Apparent Porosity		≤18	≤13.5
Cold Crushing Strength(MPa)		≥25	≥40
(MPa) Modulus of Rupture-Room Temp		≥8	---
Thermal Shock Resistance (sequence)		≥5	≥5

Core Highlights

1.Alumina-graphite seat with perfect anti-thermal shock property.

2.The bore adopts sintered zirconia materials with perfect anti-corrosion and anti-erosion property

3.The end part adopts stablized zirconia product,has better anti-erosion property,and also perfect for steel flow control.

FAQ

Q: Slow Heat Conduction

A: 1. Not preheating according to the standard procedure.
2. Slag influences heat conduction.
3. The crucible has reached its service life.
Q: Crucibe corrosion

A: 1. Adding flux before metal is molten or excessive use of flux.
2. Certain fluxes contain corrosion substances.
3. Fuel containing corrosive substance.
4. Abnormal high-temperature operation may result in glaze layer smelting resembling corrosion.
Q: Top problems

A: 1. Repeatedly top impacted on top area cause oxidation.
2.Slags accumulated arround the top area or between the top area and the furnace cover.
3.Small gape between the top and the furnace cover. 4. Low temperature on top area.
5. Contacting with some matels with lager heat exchanging coefficients.
6. Excentral installation cause not enough space between the top and furnace.
Q: Excessive oxidation

A: 1. Flame in furnace against the bottom of the crucible directly.
2. Low temperature in the top area. 3.Overheated working temperature.
4. Hoisting or moving improperly damages glaze layer.
5. The emergent drain hole is open.
Q: Explosion

A: 1.Heating rapidly while the crucible has damped during transportation or storage.
2. Over rapid heating-up during preheating procedure.
3. The added materials are not completely dried.
Q: Middle or bottom craks

A: 1.Impacted during transportation or installation.
2. Crucible should be placed in the middle of the furnace stack smoothly and stably.
3. An improper graphite stand is used.
4. The existence of great thermal difference in the furnace.
5.Matel ingots in the crucible filled horizontally or diagonally.Metal materials overfilled.
6. Leftover slag or molten matal in the crucible.

Inquire Now

Name*
E-mail*
Phone
Country
Message
Verification Code:*